Semua produk
-
Detektor Cacat Ultrasonik
-
Pengukur Ketebalan Ultrasonik
-
Pengukur Ketebalan Lapisan
-
Penguji Kekerasan Portabel
-
Detektor Cacat Sinar X
-
Penjelajah pipa sinar-X
-
Detektor Liburan
-
Pengujian Partikel Magnetik
-
Peralatan Pengujian Arus Eddy
-
Pengujian penetran
-
Durometer Pantai
-
Penguji Kekerasan Brinell
-
alat uji kekerasan rockwell
-
Penguji Kekerasan Mikro Vickers
-
Penguji Kekerasan Bahan
-
Pengukur getaran
-
alat uji kekasaran permukaan
-
Proyektor Profil
-
Gloss Meter
-
Palu uji beton
-
Laser Infrared Thermometer
-
BobBlok Uji Kalibrasi Astm E114-15 Inch Tipe 1018 Baja Karbon Mini Iiw 2 -
WilliamBlok Uji Kalibrasi Astm E114-15 Inch Tipe 1018 Baja Karbon Mini Iiw 2
-
tomBlok Uji Kalibrasi Astm E114-15 Inch Tipe 1018 Baja Karbon Mini Iiw 2
-
LeoBlok Uji Kalibrasi Astm E114-15 Inch Tipe 1018 Baja Karbon Mini Iiw 2
Iso / Dis 19675 Paut Ultrasonic Calibration Block Carbon Steel 1018
Hubungi saya untuk sampel gratis dan kupon.
Ada apa:0086 18588475571
Wechat wechat: 0086 18588475571
Skype: sales10@aixton.com
Jika Anda memiliki masalah, kami menyediakan 24 jam bantuan online.
xDetail produk
| Bahan | baja karbon, baja tahan karat, baja tahan karat dupleks 2205, aluminium 7075, besi cor nodular | Standar | Standar ISO/DIS 19675 |
|---|---|---|---|
| Sertifikat kalibrasi | Termasuk | Pengadilan | Termasuk |
| OEM | Ya. | Nama produk | Blok kalibrasi ultrasonik array bertahap |
| Berat Bruto | 6kg | ||
| Menyoroti | paut ultrasonic calibration block,carbon steel 1018 ultrasonic calibration block,carbon steel 1018 paut calibration block |
||
Deskripsi Produk
Carbon Steel 1018 ISO/DIS 19675 PAUT Calibration Block Ultrasonic Calibration Block
Standard ISO/DIS 19675:2017 specifies the requirements for the dimensions, material and manufactures of a steel block for calibrating ultrasonic test equipment used in ultrasonic testing with phased array technology.
HUATEC brand ISO/DIS 19765 block material: carbon steel 1018, stainless steel 304/316, duplex stainless steel 2205,aluminum 6063/7075,nodular cast iron and other materials.
Mark: HUATEC and OEM can be done
The basic verification of PAUT ultrasonic calibration block: material velocity verification, wedge delay verification and Angle correction gain verification
Further requirements of the PAUT ultrasonic calibration block:
It needs to be lightweight, cost-effective and meet the requirements of international regulations;
Can check the phased array probe according to other ISO standards;
Customer can quickly and simply check and confirm that the ultrasonic characteristics of test blocks meet the requirements.
Two appendices were included in ISO 19675 to enable operators to quickly understand the appropriate use of the new PAUT test block.
Appendix A is A normative appendix that describes the measurement method of material anisotropy and instructs the test block maker how to determine the speed of sound (these values are required to be included in the technical documentation provided with the test block to the user for verification and acceptance by the operator).
Appendix B is a reference appendix. The purpose is to compare PAUT test blocks with ISO2400 test blocks (i.e., to compare old and new IIW test blocks), and to briefly explain some other possible uses, such as PA probe wedge delay assessment, petal assessment, active array element assessment, sensitivity equalization, data mapping verification, phased array element configuration, etc.
HUATEC Group offer all kinds of ultrasonic calibration test block
Rekomendasi Produk