Harga yang bagus  daring

detail produk

Rumah > Produk >
Pengukur getaran
>
Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v

Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v

Nama Merek: HUATEC
Nomor Model: HG-808A
MOQ: 1 buah
Detail Kemasan: Paket Ekspor Standar
Ketentuan Pembayaran: T/T, Paypal, Western Union
Informasi Detail
Tempat asal:
Beijing
Sertifikasi:
ISO, CE, GOST
Sensitivitas melintang:
<5%
Mengukur parameter:
Kecepatan atau percepatan, nilai virtual atau nilai puncak percepatan
Tegangan keluaran nilai getar:
0-5V
Tingkat Alarm:
2
Output alarm:
Titik sentuh relai di setiap tingkat (biasanya terbuka atau tertutup opsional)
Lindungi nilai:
IP65
Menyediakan kemampuan:
500 pcs per bulan
Menyoroti:

portable vibration meter

,

digital vibration meter

Deskripsi Produk

 

Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v

 

Overview

 

    Integrated vibration switch, it is design to integrated by acceleration sensor, integrator,transduce and relay. Output 0-5V vibratory acceleration peak value or effective speed, and corresponding to the two touch spots of II level alarm.

    Integrated vibration switch is easy to install,it is use together with panel meter, DCS, PLC etc. monitoring system of spot.

                                                                                                                  

Technique specification                                                               

1. Transverse sensitivity: <5%

2. Shell electrical isolation

3. Measure parameter: velocity or acceleration, virtual value or acceleration peak value

4. Measure range optional: Max 180 ms-2 Or200mm/s

5. Vibrating value voltage outpute: 0-5V

6. Frequency Response:

          10-1000Hz(velocity,5% accuracy)

          1-1000 Hz(acceleration,5% accuracy)

7. Working tempreture (℃): -20~70;

8. Power supply: 24Vdc;

9. Alarm level: 2

10. Alarm output: relay touch spot on each level(normally open or close optional)

11. alarm value adjustable

12. Cable socket Model:(SY)X12KX3P

13. Case material: aluminum, sealed

14. Extraction: sideway

15. Protect grade: IP65

16. Sensor install: M8 x 1

17. size:Ф40 x 80 mm

18. weight: 250g

 

Connection method

 

Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v 0

 

Attention

  1. Sensor and the object that under test should be closely connected. surface should be smooth, Sensor is installed by washer
  2. For prevent loose and water vapor entrance, after the cable socket and sensor socket tighten could smear silicon rubber
  3. For avoid the interference from earth wire, terminals of the transducer and the case is isolated. Please notice don’t shot out

 

Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v 1

Penilaian & Ulasan

Peringkat keseluruhan

5.0
Berdasarkan 50 ulasan untuk pemasok ini

Cuplikan Peringkat

Berikut adalah distribusi dari semua peringkat
5 Bintang
100%
4 Bintang
0%
3 Bintang
0%
2 Bintang
0%
1 Bintang
0%

Semua Ulasan

1
12
Brazil Oct 29.2025
123