Semua produk
-
Detektor Cacat Ultrasonik
-
Pengukur Ketebalan Ultrasonik
-
Pengukur Ketebalan Lapisan
-
Penguji Kekerasan Portabel
-
Detektor Cacat Sinar X
-
Penjelajah pipa sinar-X
-
Detektor Liburan
-
Pengujian Partikel Magnetik
-
Peralatan Pengujian Arus Eddy
-
Pengujian penetran
-
Durometer Pantai
-
Penguji Kekerasan Brinell
-
alat uji kekerasan rockwell
-
Penguji Kekerasan Mikro Vickers
-
Penguji Kekerasan Bahan
-
Pengukur getaran
-
alat uji kekasaran permukaan
-
Proyektor Profil
-
Gloss Meter
-
Palu uji beton
-
Laser Infrared Thermometer
-
BobBlok Uji Kalibrasi Astm E114-15 Inch Tipe 1018 Baja Karbon Mini Iiw 2 -
WilliamBlok Uji Kalibrasi Astm E114-15 Inch Tipe 1018 Baja Karbon Mini Iiw 2
-
tomBlok Uji Kalibrasi Astm E114-15 Inch Tipe 1018 Baja Karbon Mini Iiw 2
-
LeoBlok Uji Kalibrasi Astm E114-15 Inch Tipe 1018 Baja Karbon Mini Iiw 2
19mm Thickness Duplex Asme Ut Calibration Block
Hubungi saya untuk sampel gratis dan kupon.
Ada apa:0086 18588475571
Wechat wechat: 0086 18588475571
Skype: sales10@aixton.com
Jika Anda memiliki masalah, kami menyediakan 24 jam bantuan online.
xDetail produk
| Bahan | baja karbon, baja tahan karat, baja tahan karat dupleks 2205, aluminium 7075 | Ketebalan | 19mm/38mm/75mm/125mm |
|---|---|---|---|
| Diameter lubang | 2,5mm/3/5,5/6,5 | Sertifikat kalibrasi | Termasuk |
| Pengadilan | Termasuk | OEM | Ya. |
| Nama produk | Blok Kalibrasi Ultrasonik ASME | ||
| Menyoroti | duplex Asme Ut Calibration Block,duplex Ut Calibration Block,19mm Asme Ut Calibration Block |
||
Deskripsi Produk
ASME ultrasonic Calibration Blocks Ultrasonic calibration blocks ultrasonic calibration blocks uk
ASME calibration block (non pipe)
Standard: ASME BPVC-V-2015
The size and shape of ASME non-pipe weld test block are shown in the chart below, when inspected
For inspection on materials with surface diameter greater than 500mm, test blocks with the same curvature as the workpiece or standard test blocks with a diameter equal to or less than 500mm can be used
During the upper inspection, the curve test block, namely the tube seam test block, should be used.
1. The distance between each slot and either end of the test block or other slots is not less than T or 25mm, if larger.
2. The minimum length L of the test block shall be 200mm or 8T, if larger.
3. When the inner diameter is equal to or less than 100mm, the minimum radian is 270°. When the inner diameter is greater than 100mm, the minimum arc length is 200mm or 3T, and the larger is taken
4. The depth of each tank is 11% T≥h≥ 8% T, width ≤6mm, length ≥225mm
ASME calibration block (non pipe)
Standard: ASME BPVC-V-2015
The size and shape of ASME non-pipe weld test block are shown in the chart below, when inspected
For inspection on materials with surface diameter greater than 500mm, test blocks with the same curvature as the workpiece or standard test blocks with a diameter equal to or less than 500mm can be used
During the upper inspection, the curve test block, namely the tube seam test block, should be used.
1. The distance between each slot and either end of the test block or other slots is not less than T or 25mm, if larger.
2. The minimum length L of the test block shall be 200mm or 8T, if larger.
3. When the inner diameter is equal to or less than 100mm, the minimum radian is 270°. When the inner diameter is greater than 100mm, the minimum arc length is 200mm or 3T, and the larger is taken
4. The depth of each tank is 11% T≥h≥ 8% T, width ≤6mm, length ≥225mm
Material: carbon steel 1018, stainless steel 304/316, duplex stainless steel 2205,aluminum 7075
Hole diameter:2.5/3/5.5/6.5mm
Thickness: 19mm/38mm/75mm/125mm
Mark: OEM can be done
HUATEC Group offer all kinds ultrasonic calibration block
Rekomendasi Produk